To power ON the Vscan Air probe
- To power on the Vscan Air the first time the first step is to start a charging cycle.
- Place the Vscan Air probe on the wireless charger as shown in ‘How to charge the Vscan Air’
- To turn ON the Vscan Air probe, press and hold the power button for 1 second.
- The LEDs start blinking white light when the Vscan Air probe is switched ON and searching for Vscan Air app.
.
LED blinking white light
NOTE
- A Vscan Air probe will search for a Vscan Air app for 5 minutes after being started. If not successfully paired within those 5 minutes, it will power OFF except if placed onto the wireless charger while still being powered.
- A powered Vscan Air probe will search for a Vscan Air app for 20 seconds after it is put onto the wireless charger, and it continues its search when removed from the charger. User can manually trigger a search for the Vscan Air app by clicking the probe power button when a powered probe is charging.
To power OFF the Vscan Air probe
- To turn OFF the Vscan Air probe, press and hold the power button for 3 seconds.
- The LEDs color change to steady magenta when shutdown has been initiated.
LED steady magenta light
NOTE
- When the button is pressed to power off, wait for 1 minute for the device to shut down completely.
- The system will not save any live image that is not stored when switching off the device. To save the current image on screen, press Save.
Disclaimer: The information herein is not intended to replace the product’s User Manual. Please consult the User Manual for comprehensive information and cautionary guidance about the product’s operation and use.