1. Vscan Air ™
  2. Solution home
  3. Vscan Air - Using Device
  4. Display Screen
Open navigation

Image Crop Indicator

Vscan Air maximizes the image display on the screen in the portrait mode. As a result, at certain depths, image corresponding to the entire transducer width may not visible on screen in portrait mode. Image crop indicators are displayed in such cases to make the user aware of this.

 

 Image crop indicator

a. Curved array (deep scanning) transducer

b. Linear array (shallow scanning) transducer


If it is important to visualize the entire width, it is possible to do one of the below:

  1. Rotate the display device to visualize the image in landscape orientation.
  2. If portrait mode is preferred:
    • The depth can be increased until the whole width is displayed, and image crop indicators no longer appear.
    • Zoom and pan to visualize the edge of the image on the desired side.

Disclaimer: The information herein is not intended to replace the product’s User Manual. Please consult the User Manual for comprehensive information and cautionary guidance about the product’s operation and use.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article